Showing 129–144 of 154 results
-
Resistor Replacement 2 – Pack 22QBK-ND
$3.002-pack of 22QBK-ND resistors. MSx30 R15 and R20. 22 ohm, 1/4 watt, 5% tolerance.
Add to cart -
Diode Replacement 2 – Pack 1N5819DICT-ND
$3.002 pack of 1N5819DICT-ND Schottky diodes. MSx30 D17, D18.
Add to cart -
Diode Replacement 3 – Pack 1N4753ADICT-ND
$3.003 pack of 1N4753ADICT-ND diodes. MSx30 D6, D20, D21.
Add to cart -
Diode Replacement 6 – Pack 1N4001DICT-ND
$3.497 pack of replacement 1N4001DICT-ND rectifier diodes. MSx30 kit part number D1, D2, D3, D9, D10, D11.
Add to cart -
MegaSquirt PWM IAC Valve Control (TIP120) ‘Mod-Kit’
$9.99These are the parts needed for the 'TIP120 PWM idle valve' mod. If you are installing all optional components on the v3 heat sink (leaving no extra space for this transistor there) then you can drill a hole in your case and use it as your heat sink or a...
Add to cart -
MegaSquirt Pull-up Resistors Mod Kit
$3.99Six 1k 1/4w resistors, and four 470ohm 1/4w resistors. Perfect for use as 'pullup resistors' for your MS ECU modding needs. These can be used for several of the mods described in some of our car-specific install articles listed on the site. NOTE: Th...
Add to cart -
MegaSquirt Relay Control Mod Kit (VTEC, TVIS, Fans)
$9.99Modkit used to build a relay control circuit, suitable for switching a relay on/off and controlling fans, VVT, VTEC, TVIS, anything a relay can control. Usable on the PCBv3.0, v3.57 or PCBv2.2 ECUs Information and an example of how to implement this...
Add to cart -
MegaSquirt Ford Bias Resistors Mod Kit
$3.99This is a simple two-part kit with two 1/4w 27kohm metal film resistors to replace R4 and R7 in any MegaSquirt PCB2.2 or PCB3.0 ECU. This will allow for use of the stock Ford temperature sensors without recalibrating the MegaSquirt for the Ford sensors. N...
Add to cart -
Capacitor Replacement 2 – Pack 478-1878-ND
$6.492 pack of 399-1420-ND capacitors. MSx30 C16, C17. The original spec is to use 22 uF 25 volt tantalum radial capacitors. We've upgraded these to a new part number, 478-1878-ND, which is rated for 35 volts that can better survive brief voltage spik...
Add to cart -
Capacitor Replacement 2 – Pack 399-1416-ND
$3.492 pack of 399-1416-ND capacitors. MSx30 C14, C22. 4.7 uF 25 volt tantalum radial capacitors.
Add to cart -
Capacitor Replacement 3 – Pack 399-2075-ND
$3.253 pack of 399-2075-ND capacitors. 0.01 uF ceramic radial capacitors, 50 volts maximum. MSx30 C11, C21, C32.
Add to cart -
Replacement Y1 Clock Crystal 300-1002-ND
$3.00Replacement Y1 clock crystal for MegaSquirt and MegaView kits.
Add to cart -
Capacitor Replacement 2 – Pack 399-4389-ND
$3.252 - MSx30 capacitors C5 and C7. 1.0 uF ceramic radial capacitors, 50 volts maximum. Part number 399-4389-ND.
Add to cart -
Capacitor Replacement 6 – Pack 399-2017-ND
$3.00Replacement 6 pack of capacitors, P/N 399-2017-ND. 1000 pF ceramic radial capacitors, 100 volts maximum. Alternate part 399-4202. MSx30 C4, C6, C8, C12, C15, C31.
Add to cart -
Capacitor Replacement 4 – Pack 399-4353-ND
$3.004-pack of 399-4353-ND capacitors. 0.22 uF ceramic radial capacitors with 50 volts maximum. Used in V3.0 boards for C2, C9, C10, C30.
Add to cart -
Capacitor Replacement 10 – Pack 399-4329-ND
$3.1010-pack of 399-4329-ND capacitors. 0.1 uF ceramic radial capacitors, 50 volts maximum. Used in V3.0 boards for C1, C3, C13, C18, C19, C23, C26 through C29,
Add to cart
