Cart

Quick Links

Replacement MS3-Pro fuse, 500 mA
Replacement MS3-Pro fuse, 500 mA
Replacement MS3-Pro fuse, 500 mA
Replacement MS3-Pro fuse, 500 mA

MS3Pro Module F1/F2 Replacement Fuse

$3.00

-

Add to wishlist
SKU: 0451001.MRL Categories: , , Tags: , , ,

Description

The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand.

This is the 1000mA fuse used to protect both the 12V and 5V power supplies on the MS3Pro Module and MS3Pro PNP ECU’s.

Fuses sold individually.

Customer reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Where are the fuses located on the MS3-Pro?

  • They are on the top side of the board, near the white connector.

How far do I have to disassemble the MS3-Pro to replace the fuses?

  • You will need to disassemble the case and remove the PCB.

What tools are needed to replace the fuse(s)?

  • Only a #2 phillips bit screwdriver with a good tip.

Why did the fuse blow, anyway?

  • The most likely causes are short circuits on the VREF or stepper IAC control wires.

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Only registered users are eligible to enter questions

Related products

  • Evo Flying Lead harness

    MS3Pro EVO Wiring Harness – Universal Flying Lead

    5 out of 5
    $299.00

    MS3Pro EVO Complete 8' Flying Lead Harness Only (White & Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.  

    Add to cart

  • MS3Pro EVO+ ECU w/ 8′ Flying Lead Harness

     $1,399.99

    The MS3Pro EVO+ by AMP|EFI represents the latest in next-generation engine management, delivering a powerful suite of tuning and control features for high-performance applications. Built on the proven MS3Pro platform, the EVO+ is equipped with three AMPS...

    Add to cart
  • Resistor Pill for pull-up - 1k

    Sealed resistor – 1K

     $4.50

    We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...

    Add to cart

  • MS3Pro EVO+ ECU Only

     $1,149.99

    The MS3Pro EVO+ by AMP|EFI represents the latest in next-generation engine management, delivering a powerful suite of tuning and control features for high-performance applications. Built on the proven MS3Pro platform, the EVO+ is equipped with three AMPS...

    Add to cart
  • AXM-100 high voltage tach adapter

    AXM-100 High Voltage Tach Adapter

     $64.99

    Many older tachometers trigger off the negative terminal of the ignition coil.  Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...

    Add to cart
  • MS3Pro Ultimate AMP AMPSEAL 35 pin connector with terminal pins - uncrimped 2

    MS3Pro ULTIMATE Uncrimped AMPSEAL Connectors

     $89.99

    Planning to make your own ULTIMATE harness? This plug and pin kit features the MS3Pro ULTIMATE AMPSEAL white, black & gray connectors, plus 100 pins- more than enough for making your own! (EVO/ 1st Gen 2-connector AMPSEAL Kit sold separately)

    Add to cart