$6.50
-
To make sure you can’t accidentally switch the upper and lower harnesses, the MS3X harness uses a male DB37 connector instead of a female one. We’ve packaged a DB37 male solder cup connector and a metalized plastic backshell for your MS3X builds. See the MS3 manual wiring diagram for how to wire it up.
There are no questions yet, be the first to ask something for this product.
12v DC Power Supply Plugs directly into your MegaSquirt JimStim Stimulator! Power supply supports 120 to 240 volt AC power.
Add to cart
This is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart
The regular JimStim can test the main board on your MS3. But what if you'd like to see the inputs and outputs on the MS3X expansion card in action, too? Now it's easy - just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 vo...
Add to cart
MegaSquirt MS3X Wiring Bundle - Length = 8' 8' of TXL High temp automotive grade wire. Color coded wiring with labeling printed on the wire every 6 inches -- no paper tags here! Use with MS3X Expansion board or other sequential device Just ...
Add to cart
Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs t...
Add to cart
DB15 pigtail harness. Used for optional outputs on the expansion connector on V3.57 boards and for the V1.2 version of the MSPNP Gen 2 (the version with the red main board).
Add to cart
Reviews
There are no reviews yet.