Cart

Quick Links

Bosch 52 lb/hr High Impedance Injector

Bosch 52 lb/hr High Impedance Injector

(1 question)

$62.00

-

Frequently purchased together

Fuel Injector Pigtails - Bosch EV6

Fuel Injector Pigtails - Bosch EV6

Add to wishlist
SKU: INJ_Bosch52 Category: Brand:

Description

Modified Bosch/Ford injectors. These have a 60 mm length and 14 mm O-rings for fitting most American V8s, as well as many other German and domestic applications. These injectors are enough to feed 80 hp per injector, naturally aspirated. They use EV6 connectors, so 5.0 Mustangs, Chevy TPI motors, and some others will need adapters or replacing their connectors with EV6 style connectors.

Some engines these injectors will fit (for factory intake manifolds) would include:

  • Ford 5.0 (Windsor) V8s
  • Chevrolet L98 / TPI motors and 1990s LT1
  • Chevrolet LS1
  • BMW M20, M30, and M50

Note that many later LS engines used shorter injectors, particularly truck motors. For engines after the LS1, you will need to check injector length before ordering.

Sold individually.

Customer reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

How much horsepower will these injectors support?

  • We recommend this for engines making up to 80 hp per cylinder naturally aspirated or 68 hp per cylinder on forced induction. These numbers are for gasoline; the maximum horsepower will be lower on alcohol.

Questions & Answers

    At what fuel pressure do they deliver 52lbs/hr? It says high impedance, will the MS3X drive 8 of these injectors in a sequential setup. My displacement is 460 cubic inches.
  1. 0 votes
    Q At what fuel pressure do they deliver 52lbs/hr? It says high impedance, will the MS3X drive 8 of ...... Read more
    Asked by Bob
    A

    They are rated at 43.5 psi. And the MS3X will have no problem with them.
Only registered users are eligible to enter questions

Related products

  • Bosch 72 lb/hr High Impedance Injector

     $78.00

    Modified Bosch/Ford 72 lb/hr injectors. These have a 60 mm O-ring to O-ring length and 14 mm O-rings for fitting most American V8s, as well as many other German and domestic applications. These injectors are enough to feed 110 hp per injector, naturally a...

    Read more

  • 1200cc Fuel Injector – High Impedance 14mm

     $139.00

    1200cc Fuel Injector - 14mm, Saturated/high impedance   1200cc high impedance injectors. These are 60mm long with a 14mm O-ring. EV1 style connector. Fits many domestic applications. We're also using them on our 2JZ powered land speed 240sx, whic...

    Add to cart

  • Bosch 42 lb/hr High Impedance Injector

     $62.00

    42 lb/hr injectors are perfect for domestic V8 builds, and also fit many German applications. These have a 14 mm O-ring and EV6 style connector, with a 60 mm O-ring to O-ring distance. Some engines these injectors will fit (for factory intake manifolds...

    Read more

  • 1000cc High Impedance 11mm EV6 Fuel Injector

     $79.00

    These injectors are intended for Japanese cars - Miatas, Toyotas, and many others. They are based on EV14 injectors that have been modified to fit an 11 mm O-ring. Uses an EV6 connector. 1000 cc injectors, perfect for any build best described as "too much...

    Read more

  • 2000cc Fuel Injector – High Impedance 14mm

     $175.00

    2000cc Fuel Injector - 14mm, Saturated/high impedance   For when too much is not enough, DIYAutoTune.com offers these enormous 2000cc fuel injectors! These use a 14 mm O-ring and a Nippondenso style connector, with a 60 mm O-ring to O-ring distan...

    Add to cart

  • Bosch 115 lb/hr High Impedance Injector

     $135.00

    These are Bosch EV14 injectors that have been modified for 14 mm O-rings and a long 60 mm body to fit many common American performance applications. These injectors are good for a massive 175 hp per cylinder (using a 0.55 lb/hp-hr BSFC and 85% maximum dut...

    Read more