Search Results for: Mazda Miata MS3Pro PNP ECU/feed/rss2
MegaSquirt-III MS3X Expansion Card & Connector Kit
SKU: MS3Xpander
$110.49
Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs to the MS3 ECU: 8 Sequential fuel injection outputs. Each can…
View Details-
Add to cartJimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled
SKU: jimstim-k
$80.99
Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for…
View Details-
Add to cartHall Effect Threaded Body Crank/Cam Position Sensor
SKU: HallThreaded-K
$102.99
This Hall Effect Crankshaft Position Sensor is designed for accurate crankshaft position detection and is suitable for a range of automotive applications. Its threaded body allows for secure installation and ensures durability in demanding environments. Features: Hall Effect Technology: Provides precise crankshaft position sensing Threaded Body: Ensures secure and stable mounting Versatile Compatibility: Suitable for…
View Details-
Add to cartMagnecor KV85 LS Engine Spark Plug Wire Set for IGN1A Smart Coils
SKU: SPW-LSX
$140.00
Magnecor KV85 Race Spark Plug Wires for the LS Engine Custom made for our AMPEFI MaxSpark LS Engine Ignition Systems– these Magnecor KV85 Race Spark Plug Wires for the LS Engine are just what you need if you’re using our brackets and coils piecing together your own kit, or if you’re using our MaxSpark PNP…
View Details-
Add to cart1/8 NPT 4 Bar MAP Sensor & 15ft cable w/ 90° Boot Combo
SKU: LDM-899004-w_Piggy
$76.99
This combo package is perfect for monitoring manifold pressure for a wide range of boost levels. It includes a 4 Bar MAP Sensor for high-boost applications and a 1-to-3 Bar MAP Sensor, ensuring accurate data in any performance setup. The 15-foot cable and 90° boot make installation easy, even in tight or custom engine bays.…
View Details-
Add to cart1/8 NPT 3-Bar MAP Sensor & 15ft cable w/ 90° Boot Combo
SKU: LDM-899003-w_Piggy
$76.99
This combo package is perfect for monitoring manifold pressure for a wide range of boost levels. It includes a 1/8 NPT 3-Bar MAP Sensor for high-boost applications and a 1-to-2 Bar MAP Sensor, ensuring accurate data in any performance setup. The 15-foot cable and 90° boot make installation easy, even in tight or custom engine…
View Details-
Add to cartCoil Driver Kit
SKU: MK-CoilDrvr
$10.99
Note: This part supersedes the Bosch BIP373. OnSemi EcoSPARK IGBT, perfect for use as a high current ignition driver and can be used as Q16 in your v3.57 or v3.0 MegaSquirt build. This is the same high current ignition driver as used in many of our current ECU products as well as the QuadSpark ignition…
View Details-
Add to cartPKIT – MegaSquirt-III PCBv3.0 Partial Kit
SKU: MS330-pkit
$326.25
MegaSquirt-III PCBv3.0 Partial Kit PCBv3.0, MegaSquirt-III daughterboard and MPX4250 MAP Sensor for building a MegaSquirt-III PCB 3.0 ECU. Complete Bill of Materials (parts listing) and assembly instructions can be found HERE . Click HERE for complete MegaSquirt-III PCBv3.0 kits with all parts needed in a nicely labeled kit.
View Details-
Add to cartMegaSquirt V3.0 PCB Components Kit
SKU: MSx30-Guts
$142.99
This MSx30-Guts kit includes all the capacitors, diodes, integrated circuits, resistors, transistors, ECU connectors, the tube of heatsink compound and a bit of jumper wire in a Megasquirt V3.0 kit. The kit does not include the V3.0 PCB, case, endplates, processor card or heat sink.
View Details-
Add to cartHSD-4 Channel High Side Driver
SKU: HSD-4
$109.99
Need to power multiple solenoids with high-speed switching but without the cost of multiple solid-state relays? The HSD-4 High Side Driver module is designed to control up to four medium-current 12V devices using solid-state switching, perfect for solenoids that require rapid operation. Features: Four High-Side Drivers: Ideal for solenoids that need 12V power instead of…
View Details-
Add to cart