Search Results for: reluctor/attachment/motionraceworks-extra-product-wm-10/feed/rss2/
DIYPNP Documentation for 1985-1989 Toyota MR2
1985-1989 Toyota MR2 (AW11) USDM 4AGE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a 58K original mile USDM 1986 Toyota MR2 with 4AGE Motor. All factory electronics/ignition system components are in place and the factory wiring harness is in perfect condition. This car has been turbocharged, the injectors…
Read MoreDIYPNP Documentation for 1985-1989 Toyota Corolla
1985-1989 Toyota Corolla (AE82 FX16, AE86, and AE92) USDM 4AGE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a 58K original mile USDM 1986 Toyota MR2 with 4AGE Motor. No it wasn’t a Corolla, but the motor and wiring harness are identical making it a good test vehicle. …
Read MoreExtra Inputs and Outputs – DIYPNP v1.1
There is much you can control with DIYPNP beyond fuel and ignition. Exactly what you can control will depend on the code loaded. This chart shows which points on the DIYPNP can be used for what function for current, beta, and proposed code variants. The DIYPNP also brings out the CANBUS for connection to (currently…
Read MoreIgnition Control – DIYPNP v1.1
Ignition control is one of the more involved parts of the DIYPNP installation to set up, and may take a bit of trial and error if you do not have an application guide to cover what mods you need. This page will explain the ignition control, both the inputs and the outputs. We’ve made the…
Read MoreExtra Inputs and Outputs – DIYPNP v1.5
There’s a lot you can control with the DIYPNP beyond fuel and ignition. Exactly what you can control will depend on the code loaded. This chart shows which points on the DIYPNP can be used for what function for current, beta, and alpha code variants. The DIYPNP also brings out the CANBUS for connection to…
Read MoreIgnition Control – DIYPNP v1.5
Ignition control is one of the more involved parts of the DIYPNP installation to set up, and may take a bit of trial and error if you do not have an application guide to cover what mods you need. This page will explain the ignition control, both the inputs and the outputs. We’ve made the…
Read MoreMain Board Assembly
First, you will want to decide which components you will be using, as not all installations need all components. Here is a list of what parts go with what circuit. Note that U3 is used for multiple circuits, and must be installed for any of the circuits to work. There are a couple parts that…
Read MoreFully Assembled Wire-In EMS Systems
Contact our Technical Sales Team to discuss the perfect system for your Engine Management Needs! Email us at [email protected] with some details on your vehicle, engine and and must-have features and we’ll make sure you’re pointed in the right direction! Ready to Rock Engine Management Systems ready to wire and fire! MS3Pro Sequential Electronic…
Read More
DIYAutoTune’s Land Speed Nissan 240SX Project
Find out the latest on our Land Speed Racing adventures at the Ohio Mile and the Bonneville Salt Flats! Why Land Speed Racing? And how did we pick the Nissan 240sx? Since 2006 I’ve been to Speedweek on the Bonneville Salt Flats every years sans one. Each year I’ve (Jerry Hoffmann) gone out there I’ve…
Read MoreHow to use a GM TBI adapter board
Updated 1/23/2008 What does this board do? GM TBI adapter board (currently available in bare PCB form) allows you to install MegaSquirt into GM trucks with the ECM part number 1227747 and cars with ECM part number 122746. Some examples include full size trucks from 1988 to 1992 with the 4.3 V6, 5.0 or 5.7…
Read More