MegaSquirt V3.0 Case

SKU: E-MS330-Case

This is the enclosure as used with the MegaSquirt-III V3.0 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.0 ECU kits.  It is required if you are upgrading from an an MS1 or MS2 with…

-

IGN1A Smart Coil

SKU: IGN-1A

The IGN1A Smart Coil by AMP EFI requires no CDI Ignition Module to produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge. They are the same monster coils used in Street Outlaws No Prep Kings contender, ‘The Hulk!’ Each IGN1A Smart Coil features a…

-

GM 3 Bar MAP Sensor

SKU:

This GM 3-Bar MAP Sensor allows you to monitor up to 29 psi of boost pressure, making it an excellent choice for boosted applications. It offers accuracy and reliability, and it is frequently used with MegaSquirt ECUs, particularly in turbocharged or supercharged vehicles. Features: Measures pressure from 1 Bar to 3 Bar (absolute) Reliable sensor…

-

USB Tuning Cable

SKU: USB-TuneCab6

USB A to Mini B cable. Use this with the following products: MS3Pro EVO MS3Pro Ultimate CAN-EGT MS1 or MS2 V2.2 or V3.0 modified with DLP-TXRX mod kit We include this cable with MS3Pro EVO & Ultimate. Does not fit MS3 V3.0 or V3.57.

-

DLP-TXRX Internal USB/Serial Adapter

SKU: DLP-TXRX

DLP-TXRX Internal USB/Serial Adapter This adapter is perfect for converting your Megasquirt from the standard DB-9 serial connection to the USB connection common on newer laptops. The DLP-TXRX can be used on the following MegaSquirt products: MS1 V2.2 MS1 V3.0 MS2 V3.0 It is not recommended for the following MegaSquirt products: MicroSquirt MS1 V3.57 MS2…

-

MegaSquirt Relay Cable

SKU: MSRelayCable

High Quality 4′ Relay Board cable for connecting your MegaSquirt ECU to your Relay Board. Works with MS1, MS2, or MS3, all standard main boards (includes not just the IAC and ignition pins – it also has the spare pins on 3 through 6). It has a shielded wire on pin 24, grounded at only…

-

MegaSquirt 3 ECU with MS3X Expansion

SKU: MS3X357-C

Important Note:  Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures.  We appreciate your understanding.   The MegaSquirt 3 with MS3X expansion arrives equipped with features surpassing MS2 & MS1 systems, like sequential fuel & spark, 2 step, progressive nitrous, boost…

-

MS3Pro Logo T Shirt- Pink Ladies

SKU:

‘Official’ MS3Pro Pink Ladies Cut Logo T Shirt, available in various sizes!  MS3-Pro: Advanced Power Management  

-

How to MegaSquirt Your Modular Motor Powered Mustang

Applications: 1996-2004 Mustangs with the 4.6 modular motor. We’ll also have a couple tips on other vehicles with the 4.6 and 5.4 liter mod motor V8s; the modifications are about the same if you’re working with a Thunderbird, Navigator, Crown Victoria, Lightning, or F150 as well. These motors all use the same sort of crank…

How to MegaSquirt Your BMW E30 325i and Other M20/M30 Applications

MegaSquirt installation on BMW M20 and M30 engines, using the factory crank trigger MSPNP ALERT! Check out our out of the box plug & play solution for 87-92 BMW E30 325i, ready to plug into your factory harness!  Typical installation takes around an hour. It’s ready to run this engine out of the box, with no…