3D print your own ECU brackets for your NB Miata!

If you’re installing a MSPNP or DIYPNP in your ’99 to ’05 Miata, there’s several ways to mount it, from zip ties or modified brackets to third party adapters. Jackson Risi created a set of snazzy 3D printed brackets to put an MSPNP Gen 2 or DIYPNP in a second generation Miata, and he’s uploaded…

How to wire an extra analog sensor input to the MSPNP Gen 2

The MSPNP Gen 2 does not have as many analog inputs available as its big brother, the MS3Pro PNP. However, you can add an analog input with our jumper.1 kit if you are willing to give up the barometric pressure sensor or knock sensor input. No soldering is required. To carry out this modification, remove…

MS3Pro Module F1/F2 Replacement Fuse

SKU: 0451001.MRL

The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 1000mA fuse used to protect both the 12V and 5V power supplies on the…

-

Innovate MTX-AL Analog Wideband AFR Gauge – 38550

SKU: INNVT-3855

The Innovate MTX-AL combines the accuracy of Innovate’s Direct Digital wideband control technology with a classic analog gauge for a complete air-fuel ratio monitoring solution. It offers the proven performance of the MTX-L system but with an analog needle sweep instead of a digital display, making it perfect for those who prefer the traditional gauge…

-

Innovate MTX-L Plus Digital Wideband AFR Gauge – 39180

SKU: INNVT-3918

The Innovate MTX-L Plus is the next evolution in wideband gauge technology, offering unparalleled speed, accuracy, and durability. Featuring Innovate’s patented DirectDigital™ technology and advanced sensor control, the MTX-L Plus optimizes heater control and provides faster O2 sensor feedback. This makes it their most responsive and reliable air-fuel ratio gauge to date. Compatible with all…

-

Innovate DLG-1 Dual Lambda Wideband AFR Gauge – 38910

SKU: INNVT-3891

Innovate Motorsports Dual Channel wideband system. The 38910 features a complete wideband o2 setup perfect for a “V” style engine. O2 readings for both banks both show on the standard size 52mm gauge. This is the complete kit with controller and 2 sensors.

-

IGN-6 Six-Tower Coil Pack

SKU: IGN-6

The IGN-6 ‘wasted spark’ style coil pack at a glance could be mistaken for a stock Chrysler ignition coil, perhaps off of a Dodge Intrepid, but it’s not. Though it appears to be molded from the same tooling used to make stock replacement coils for some Mopar products, and would bolt right up to many…

-

JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled

SKU: jimstim-k

Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for…

-

JimStim 1.5 MegaSquirt Stimulator with Wheel Simulator – Assembled

SKU: jimstim-c

DIYAutoTune Part# JimStim-C JimStim is essentially an engine simulator, a microcontroller which allows the generates up to 30 different toothed wheel signals, in addition to the standard distributor signal. Test your RPM input on the Stim, or tell the JimStim to provide a signal like the one from a Neon, Miata, Subaru, most Fords, and…

-

MegaSquirt Boost Control Mod Kit

SKU: MK-Boost

Give your Megasquirt the ability to drive a boost control solenoid double up it’s duty as an electronic boost controller. Includes all parts required to build the MSnS-E boost control circuit on your V2.2, V3.0, or V3.57 PCB, including FET, resistors, heat sink compound, mica insulator, and mounting hardware. We’ve used it with MS1/Extra and…

-