Blog Article

Why that CDI coil might not work with an inductive ignition

So, you’re building a turbocharged 5.0 Mustang and need an ignition to light off that boost. This is going to need a bit more spark than the stock system, so you set about looking for a good coil. But a coil per plug system isn’t in the budget, and our IGN-1As don’t work particularly well…

Read More

Blog Article

Eric Anderson & Randall Wilcox- SCCA Pro Solo Defending Champs (SSM)

Eric Anderson & Randall Wilcox pilot this supercharged 1996 Miata controlled by an MSPNP Gen2… Click on any photo to view a nice video from Grassroots Motorsports on this team.   Engine — Short Block: Weisco 84xx Rings Custom Weisco Pistons ATI Super Damper Boundary Engineering Full Race Oil Pump Full Contact Crank Scrapper ACL…

Read More

Success Story

Beginning the ‘shakedown’ powertrain install, fire system, parachute, plumbing, etc!

The car finally made it back to our shop last month, and once we wrapped up a few events we had scheduled I got straight to work on it. At this point, I’ve installed a ‘shakedown engine’ which is a bone stock intenal 2JZ-GE from an NA MKIV Toyota Supra.  I’ve fitted a SupraStore.com ‘Quicksilver’…

Read More

Success Story

Gary Hart’s Land-Speed Record Holding Studebaker

Can you say 249mph MegaSquirt’d Monster? (scroll down for pics and IN CAR VIDEO) Big Block 515 with twin Garrett turbos  Full specs and details can be found at the bottom of this page.  Also there is in-car video of a record run below. So the background story is in early 2005 I sold a…

Read More

Product

MicroSquirt CAN Transmission Controller with 4L80E Subharness

SKU: MS3Ph-Trans_4L80-PKG

4L80E Plug and Play Transmission Control via MicroSquirt Seamlessly control your 4L80E transmission with MicroSquirt Transmission Control! The supplied 4L80E subharness provides a simple, plug and play integration with MS3Pro and directly mates with our LSx drop on harnesses; a perfect fit for GM 4L80E transmission. Includes wiring for the input shaft speed sensor.  This can be used as…

View Details

-

Add to cart

Product

MegaSquirt Wiring Bundle – 8′ Long

SKU: LG-WireBund

MegaSquirt Wiring Bundle 8′ TXL wire, color coded with labeling printed on the wire every 3 inches — no paper tags here! IAC and Ignition wires are included for MS-I / MS-2 use (or MS-3 Primary Harness use) Shielded Ignition input wire Great for building up your own wiring harness, or wiring up your relay…

View Details

-

Add to cart

Product

USB to Serial Adapter – Trouble Free!!

SKU: USB-2920

This FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems.  This is probably the most common item we see people come back for after a purchase, so we highly recommend grabbing one now!  We…

View Details

-

Add to cart

Product

MS3Pro Module

SKU: MS3ProMod

The MS3Pro Module puts the MS3Pro circuitry on a board where we’ve replaced the AMPSEAL connectors with 0.100″ pin headers.  What’s it for?  The MS3Pro Module is the core for our MSPNP-Pro, but we’re also making them available to the public.  MS3Pro Module is complete enough to solder a harness to one and call it an ECU, but…

View Details

-

Add to cart

Product

Hall Effect Tabbed Mount Crank/Cam Position Sensor

SKU: HallSensor

The Crank Position Sensor with Hall Effect technology is designed for precise measurement of crankshaft position and speed. Ideal for various engine management systems, this sensor provides essential data to your ECU for accurate timing and performance optimization. Features: Hall Effect Technology: Provides accurate crankshaft position and speed data Tab Mount Design: Facilitates easy and…

View Details

-

Add to cart