Showing 33–48 of 198 results
-
MegaSquirt Relay Cable
$109.99High Quality 4' Relay Board cable for connecting your MegaSquirt ECU to your Relay Board. Works with MS1, MS2, or MS3, all standard main boards (includes not just the IAC and ignition pins - it also has the spare pins on 3 through 6). It has a shielded...
Add to cart -
MegaSquirt Wiring Bundle – 8′ Long
$62.99MegaSquirt Wiring Bundle 8' TXL wire, color coded with labeling printed on the wire every 3 inches -- no paper tags here! IAC and Ignition wires are included for MS-I / MS-2 use (or MS-3 Primary Harness use) Shielded Ignition input wire Grea...
Add to cart -
JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled
$80.99Use this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...
Add to cart -
JimStim 1.5 MegaSquirt Stimulator with Wheel Simulator – Assembled
$119.99DIYAutoTune Part# JimStim-C JimStim is essentially an engine simulator, a microcontroller which allows the generates up to 30 different toothed wheel signals, in addition to the standard distributor signal. Test your RPM input on the Stim, or tell the ...
Add to cart -
JimStimX Kit – MS3X Stimulator Expansion Board – Unassembled
$51.99The regular JimStim can test the main board on your MS3. But what if you'd like to see the inputs and outputs on the MS3X expansion card in action, too? Now it's easy - just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 vo...
Add to cart -
MegaSquirt Wiring Bundle – 23″ Long
$16.00MegaSquirt Wiring Bundle - 23" Long Perfect for creating your harness adapter (perhaps using a DIYBOB along with this) or for tying into your stock wiring harness! 23" TXL wire, color coded with labeling printed on the wire every 3 inches -- no ...
Add to cart -
MegaSquirt MS3X Wiring Bundle – 23″
$29.99MegaSquirt MS3X Wiring Bundle - Length = 23" ~23" of TXL High temp automotive grade wire. Color coded wiring with labeling printed on the wire every 6 inches -- no paper tags here! Use with MS3X Expansion board or other sequential device J...
Add to cart -
GM Open Element IAT Temperature Sensor
$19.99 – $23.99This GM-style closed-element sensor is typically used as a air temperature sensor, providing accurate readings in a variety of automotive applications. The open element design ensures long-lasting durability, making it ideal for harsh environments like th...
Select options -
GM Closed Element CLT/Oil Temperature Sensor
$19.99 – $23.99This GM-style closed-element sensor is typically used as a fluid temperature sensor, providing accurate readings in a variety of automotive applications. The closed element design ensures long-lasting durability, making it ideal for harsh environments lik...
Select options -
MapDaddy 4 Bar MAP Sensor with Barometric Correction
$99.99Who's Your MapDaddy? - MapDaddy 4 Bar MAP Sensor with Barometric Correction Ready to rock your ride handling up to 44psi of BOOST! New version has a 4 bar MAP sensor combined with a 1 bar barometric pressure sensor to improve barometric pressure re...
Add to cart -
MegaSquirt V3.0 Case
$46.00This is the enclosure as used with the MegaSquirt-III V3.0 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.0 ECU kits. It is required if you are upgradin...
Add to cart -
MegaSquirt V3.57 Case
$46.00This is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart -
DB15 Pigtail Harness
$23.99DB15 pigtail harness. Used for optional outputs on the expansion connector on V3.57 boards and for the V1.2 version of the MSPNP Gen 2 (the version with the red main board).
Add to cart
