MicroSquirt CAN Transmission Controller with 4L60E Subharness

$499.99

Description

4L60E Plug and Play Transmission Control via MicroSquirt

Seamlessly control your 4L60E transmission with MicroSquirt Transmission Control! The supplied 4L60E subharness provides a simple, plug and play integration with MS3-Pro and directly mates with our LSx drop on harnesses. This harness fits GM 4L60E transmissions with and without the LUF (lock up feel) control solenoid. It does not include the input shaft speed sensor found on later 4L65E and 4L70E variants. You can also wire the harness to communicate with an MS2, another MicroSquirt EMS, MS3-Pro, or MS3 over the CAN bus.

Important Note:

NOT Compatible with the 2009+ 4L60E

Parts included

MicroSquirt Transmission Controller
Complete 4L60E plug & play wiring harness
6 pin black connector for power, ground, and CAN bus
8 pin gray connector for additional inputs
18 crimp pins for the above connector

See our MicroSquirt TCU quick start guide for more details on setting this up.

Questions & Answers

I am currently running a ms2 extra and hope to use a 2003 4l60e. Will this unit work with this combo.

0 votes

Q I am currently running a ms2 extra and hope to use a 2003 4l60e. Will this unit work with this co...... Read more
Asked by Mike Monse

A
Yes, it will communicate with the MS2 over CAN bus so it can share info with the ECU and so you can tune both with a laptop.

So my Ecu my motor uses puts out Gmlan. Would I be able to hook this to the can bus and have them work properly?

0 votes

Q So my Ecu my motor uses puts out Gmlan. Would I be able to hook this to the can bus and have them...... Read more
Asked by Thomas chung

A
Currently this unit only supports the MegaSquirt CAN protocol. However, you can supply it with analog voltage signals for engine RPM and load - just tee off the TPS wire for load and use the ECU tach output for RPM.

Your documentation states "It does not include the input shaft speed sensor found on later 4L65E and 4L70E variants." I'm new and still learning. Does this mean it cannot be used to control a 4L65E transmission? Will it work with reduced capability? Can the harness be modified to include the input speed sensor?

1 vote

Q Your documentation states "It does not include the input shaft speed sensor found on later 4L65E ...... Read more
Asked by Dave L

A
It can run the 4L65E no problem - it'll work just like a 4L60E in this case. You can add an input speed sensor if you want - currently it's just used for data logging, including calculating converter slip.

Will the harness work with a 95 s10 1 piece 4l60?

0 votes

Q Will the harness work with a 95 s10 1 piece 4l60?
Asked by Joshua caldwell

A
Yes, we don't anticipate any fitment issues for this one.

hi i have a 1950 chevy truck ls1 carberated msd controler and a 4l60e transmission and i need a simple to instal trans mission controler and was wondering about micro squirt controlers thanks

0 votes

Q hi i have a 1950 chevy truck ls1 carberated msd controler and a 4l60e transmission and i need a s...... Read more
Asked by Ted Parry

A
Sure, it will work great here. You just need to give it an RPM and throttle position signal (or use a MAP sensor).

Only registered users are eligible to enter questions

Quick Links

MicroSquirt CAN Transmission Controller with 4L60E Subharness

Tuning Cable - MS3Pro EVO & ULTIMATE ECU's

USB to Serial Adapter - Trouble Free!!

Description

4L60E Plug and Play Transmission Control via MicroSquirt

Important Note:

Parts included

Customer reviews

Reviews

Be the first to review “MicroSquirt CAN Transmission Controller with 4L60E Subharness” Cancel reply

Questions & Answers

Related products

94-95 Mazda NA8 Miata 1.8L MSPNP2 Gen 2

87-93 BMW E30 M20/M30/S38 MSPNP2 Gen 2 ECU

89-94 Nissan Silvia/180SX S13 SR20DET MSPNP2 Gen 2 ECU

02-05 Subaru Impreza WRX MSPNP-Pro

Toyota 92-98 Supra/SC300/2JZ MSPNP-Pro

GM LS 24x PNP Harness – for MS3Pro Ultimate/Evo