Cart

Quick Links

4AGE AE86 Corolla MR2 MegaSquirt Plug and Play
4AGE AE86 Corolla MR2 MegaSquirt Plug and Play
4AGE AE86 Corolla MR2 MegaSquirt Plug and Play
1989-1994 Nissan 240sx/Hardbody Pickup/KA24DE/SR20DE MSPNP Gen2 Plug and Play ECU
MegaSquirtPNP G2 T8590 for the 85-89 Toyota 4AGE and 22RE
MegaSquirtPNP G2 T8590 for the 85-89 Toyota 4AGE and 22RE

Toyota MR2/Corolla 1985-1989 4AGE AW11/AE86 MR2 4Runner/Pickup 22RE/22RTE MSPNP Gen2 Plug and Play ECU

(9 questions)
5 out of 5 based on 2 customer ratings
(2 customer reviews)

$829.99

-

Frequently purchased together

USB-2920 USB to Serial RS232 Adapter FTDI Chipset - It just works 2

USB to Serial Adapter - Trouble Free!!

Perfect Tuning CAN Gauge with different screens

**Sold Out** Perfect Tuning Universal Gauge MS3Pro, MS3, MS2

Temporarily unavailable

Add to wishlist
SKU: MSPNP2-T8590 Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , Brands: ,

Description

These OEM ECU connectors are no longer available to purchase new.  Due to popular demand for this product though, we’ve created a trade in program where you must ship us a factory PCM with a good condition connector in order to build your new MSPNP Gen2 ECU.  We will remove the connector from your factory PCM to build your new MSPNP2.  Orders received without a proper trade-in will be refunded less a 7% administrative fee so please only place an order if you have a good condition ECU/Connector to send to us to use.  

You can place your order here on the website, and then follow these instructions: Customer_Instructions – MSPNP2-T8590 Customer Supplied Connector Program to send us your connector.  We’ll build your ECU to order and get it out to you fast!

 

MegaSquirtPNP Gen2 Plug and Play for 4AGE AE86 Corolla MR2 is compatible with the following applications: 

*Fits several Toyota applications, all USDM with manual transmission:

  • 1985-1987 Toyota Corolla AE86 with 4AGE
  • 1985-1989 Toyota MR2 with 4AGE
  • 1987-1989 Toyota Corolla FWD models with 4AGE
  • 1985-1990 Toyota Pickup or 4Runner with 22RE and 22RTE

Please note that this one does not match the pinout for JDM 4AGE motors with factory MAP sensor, the 4A-GZE lineup, or later 20 valve engines. Contact our technical support for options for these motors.

MegaSquirtPNP Gen2 Plug and Play for 4AGE AE86 Corolla MR2 is easy to use and install!    

MegaSquirtPNP Gen2 Plug and Play for 4AGE AE86 Corolla MR2 Model #T8590 Features:

  • Fully Plug and Play Installation – No wiring required for basic functionality.  Average install time is under 1 hour!
  • 4AGE base map is pre-loaded to help your engine start on the first turn of the key (other model base maps included on USB stick)
  • Real time tuning and data logging with a laptop connection
  • Supports most aftermarket wideband sensors

Fully Tunable Engine Control!

  • 16×16 Fuel Tables allow high resolution tuning
  • 12×12 Ignition Tables
  • Multiple Acceleration enrichment strategies
  • Closed Loop Idle Speed Control
  • Air Conditioner Control
  • Up to 4 sequential fuel injector channels with individual trim tables (minor wiring change required to run sequential, 4AGE only)
  • Onboard peak and hold drivers support both high and low impedance injectors – No external ballast resistor is needed!
  • Allows removal of stock airflow meter

Advanced Feature Set (Included!)

  • 12×12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
  • Built-in 2-step rev limiter / launch control with flat shift
  • Real time barometric correction
  • Internal 4-bar MAP sensor reads up to 44PSI of boost
  • Overboost protection
  • Closed loop boost control (Requires boost solenoid kit)
  • Knock sensor input with adjustable sensitivity
  • Headphone output for knock sensor – listen for knock while you tune!
  • Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
  • Input for flex fuel sensor – switch between E85 and gasoline on the fly!
  • CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors…..the possibilities are limitless!

What you get in the box:

  • MegaSquirtPNP T8590 ECU
  • MSPNP RS232 serial tuning cable, 6′ (USB adapter sold separately, if needed)
  • Tuning Software and Documentation USB Stick
  • 6′ Vacuum Hose for MAP Signal and ‘T’ fitting
  • Four Screws for ECU mounting

Note: Although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. The free version included on the USB Stick can access all the features and tables of the MegaSquirtPNP. The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately). It also unlocks the ability to use customized dashboards, such as our MSPNP2 Dash, which is designed specifically to help make tuning your new build intuitive and easy!

Customer reviews

Rated 5 out of 5 stars
2 reviews
5 stars 2 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

2 reviews for Toyota MR2/Corolla 1985-1989 4AGE AW11/AE86 MR2 4Runner/Pickup 22RE/22RTE MSPNP Gen2 Plug and Play ECU

Only logged in customers who have purchased this product may write a review.

Customer Instructions – MSPNP2-T8590 Customer Supplied Connector Program

Toyota 85-89 MR2 4AGE MSPNP2 Manual

Toyota 85-87 Corolla AE86 MSPNP2 Manual

Toyota 85-90 Toyota Pickup/4Runner 22RE MSPNP2 Manual

MS2/Extra Manuals

MS2 Wideband Installation Guide

MS2/Extra firmware

MSPNP Gen 2 base maps

TunerStudio

AMP MSPNP2 Dashboard for TunerStudio

Where is this product assembled?

  • This product is assembled in Suwanee, Georgia, USA

Will this plug into my 4AGZE swap in my AE86?

  • The 4AGZE engine harness uses a different connector and will not plug in.

Is this all that I need to get started tuning my 4AGE?

  • The only other potential must-have is that if your laptop doesn’t have a 9 pin serial port, you will need our USB to serial adapter to connect to this unit. However, there are several other things you may wish to add to use this unit to its full potential.

What about the JDM 4AGE that used a MAP sensor?

  • Not only is the ECU pinout different, but these cars also used a different ignition system. Putting this MSPNP on one of those engines would require both repinning the harness and swapping to the USDM ignition module.

What about 20V swaps?

  • If you are using the 20V motor with the 16V wiring harness and ignition, this could work. It will not plug into a 20V harness. The ’96-’00 “Blacktop” wiring harness is very similar to the harness our ’93-’95 3S-GTE plug and play works with, but we have not been able to test this application in house.

Questions & Answers

    Does the "MegaSquirtPNP Gen2 T8590 for the 85-89 Toyota 4AGE and 22RE" work on my 92 toyota pickup 22re?
  1. 0 votes
    Q Does the "MegaSquirtPNP Gen2 T8590 for the 85-89 Toyota 4AGE and 22RE" work on my 92 toyota picku...... Read more
    Asked by Alex Rivera
    A

    Not unless you swap to a complete '90 or earlier wiring harness. The ECU plugs do not even physically plug in on most 1991 and later 22REs.
    2. Hello, I am in England UK, I have a 1991 Toyota Corolla AE92 Gti 16v smallport, this has a MAP sensor. Why is there no ECU suitable for the MAP sensor 4AGE
  2. 0 votes
    Q Hello, I am in England UK, I have a 1991 Toyota Corolla AE92 Gti 16v smallport, this has a MAP se...... Read more
    Asked by phil
    A

    Not only did the MAP sensor equipped 4A-GE models use a different ECU pinout, they used a different enough ignition that simply repinning the harness won't work. It would require a separate MSPNP model to accommodate these cars.

    The main reason we haven't built a separate model has been that it is difficult for us to get our hands on a test car. This wiring setup was never sold in the United States, and most people who are going to take the effort and money to import a car that was not available typically go for something more exotic. Making a plug and play for this application would be possible if we had a large enough group buy and somebody willing to bring us a test car and let us keep it a couple months.
    3. I have a 87, 22rte stroked crank Garett turbo and I can't go around the block without hitting fuel cut on the stock ecu. What do I need besides the mega squirt PNP, I also want to use my innovate wideband A/F sensor. And can I use the larger celiac Air flow meter I have ?
  3. 0 votes
    Q I have a 87, 22rte stroked crank Garett turbo and I can't go around the block without hitting fue...... Read more
    Asked by Allen Barrett
    A

    The Innovate wideband is a good call. The only other things we'd recommend would be a GM type air temperature sensor kit and a boost control solenoid. You'll make more power, and likely have an easier time tuning, if you remove the air flow meter completely. The MSPNP uses a built in MAP sensor for load.
    4. Will this work with a USDM 4agze?
  4. 0 votes
    Q Will this work with a USDM 4agze?
    Asked by Hans hansel
    A

    Only if it is being used with the 4A-GE naturally aspirated ignition and wiring harness. The 4A-GZE ECU uses a different ignition system, and the ECU connector is different as well.
    5. Hi, will this work on a Phase 1 1984 Toyota Corolla 4age AE86 from the European market (Portugal).
  5. 0 votes
    Q Hi, will this work on a Phase 1 1984 Toyota Corolla 4age AE86 from the European market (Portugal).
    Asked by Pedro Esteban Orellana
    A

    This is not an application we have been able to get a wiring diagram for - if you can send us a diagram, we can check if this works.
    6. I have a 4A-GE from a JDM AE92, would this ECU work with that as a direct replacement? If not, what would I need to do to make it work? Thanks
  6. 0 votes
    Q I have a 4A-GE from a JDM AE92, would this ECU work with that as a direct replacement? If not, wh...... Read more
    Asked by Nicolas Clift
    A

    For US market models, this one fits 1987 through 1989 AE92 models but does not fit AE92s from the 1990 or later model years. We have not been able to confirm compatibility with all JDM versions. At this point, we know it does not fit factory supercharged (4A-GZE) models. It also is known not to be compatible with units that used a MAP sensor and no air flow meter. If the engine has a vane type air flow meter and not a MAP sensor, the car was made before the 1990 model year, and has the same 42 pin connector shown, it will probably fit, but we have not been able to confirm this.
    7. It says in the description it is for the 22re but only up to 1990. What changes are needed for the 91-96 22re? I thought they were the same.
  7. 0 votes
    Q It says in the description it is for the 22re but only up to 1990. What changes are needed for th...... Read more
    Asked by James
    A

    You'd need a complete 1990 and earlier wiring harness, and possibly the earlier distributor - the later wiring is completely different. A 1990 or earlier ECU usually won't even physically plug into '91 and later wiring. The later trucks also had several different ECU variants depending on drivetrain and transmission.
    8. Would this work on a 1986 Toyota 4runner with 22rte
  8. 0 votes
    Q Would this work on a 1986 Toyota 4runner with 22rte
    Asked by Eldan Hernandez
    A

    Yes, it supports both the naturally aspirated and factory turbo versions of the 22RE for the year range listed.
    9. I bought the PNP gen for the 22re motor. I am putting this in a buggy. Do you sell wiring harnesses for this motor?
  9. 0 votes
    Q I bought the PNP gen for the 22re motor. I am putting this in a buggy. Do you sell wiring harness...... Read more
    Asked by Jesse Campbell
    A

    This unit is set up to work with a factory wiring harness. We currently do not sell the wiring harness itself.
Only registered users are eligible to enter questions

Related products